The standard key coding system, SKCS, must be learned, understood, and practiced so that information stamped on the key isn’t confused with a blind code. These numbers cannot be confused with direct codes, however, because they will nearly always be less than the actual number of cuts found in the key. It’s also important to note that you should not confuse markings from a master key system with blind codes. You must either know that information, know how to derive it, or know where to find it to make use of a direct code.īlind codes are often alphanumeric although there are times where the blind codes can be numbers only. A direct code will not clue you into the key bitting specifications, however. a designation, unrelated to the bitting, assigned to a particular key combination for future reference when additional keys or cylinders may be needed Direct CodesĪ direct code is essentially what you input into code cutting equipment to produce a key to manufacturer’s specifications. Direct codes correspond to bottom pin lengths belonging to the key bitting specification. The benefits of decoding a key using a direct code is that it is quick and straight forward. a designation assigned to a particular key which includes the actual combination of the keyīlind code n. a designation assigned to a particular key combination for reference when additional keys or cylinders may be needed.ĭirect code n. This code can be a direct code or a blind code.Ĭode n. The simplest method of decoding a key is when a code is stamped on the key bow. Methods of Decoding Keys Direct and Blind Codes With all this in mind, the goal of this article is to show you various methods of decoding a key and how to utilize the information gathered. Unless you regularly service Corbin Russwin’s various key bitting classes and depth systems, for example, they might cause great confusion without the ability to decode depths from a working key. There are times, however, where we must service keys and/or cylinders belonging to a key bitting specification that we are unfamiliar with. Schlage’s Classic key bitting specification, found commonly in commercial and residential settings, comes to mind.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |